Safety Information; Declaration Of Conformity - kala 200 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
KALA Combine multilingue
PHILIPS KALA 200
Your telephone has all advantages of the latest technological advances which make it even simpler and easier to use.

Safety information

This equipment is not designed for making emergency telephone calls when the power fails. An alternative should be made
available for access to emergency calls.
The CE marking certifies compliance with technical regulations in accordance with the Directive 1999/5/EC for
the safety of the user, electromagnetic perturbations and for radio spectrum.
Power requirements
This product requires an electrical supply of 220-240 volts, alternating monophased current, excluding IT installations defined
in standard EN 60-950.
WARNING !
The electrical network is classified as dangerous according to criteria in the standard EN60-950. The only way to power down
this product is by unplugging the power cable from the electrical outlet. Ensure the electrical outlet is located to
the apparatus and is always easily accessible.
To be able to make calls in the event of a power cut, it is recommend that this telephone be used as a complement to
another telephone which does not require mains power.
Telephone connection
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard
EN 60-950).
Safety precautions
Do not allow the handset to come into contact with water.
Do not open the handset or the base station. This could expose you to high voltages. Contact our after-sales service for all
repairs.
Do not allow the charging contacts or the battery to come into contact with conductive materials such as keys, paper clips,
rings, bracelets, etc.
Make sure you insert the batteries with their polarities in the correct position.
Environmental care
Your telephone has also benefited from the Philips EcoDesign program –Environmental Conscious Product Design – which
considers the environmental impact of a product during its entire life cycle.
Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and
old phone and where possible promote their recycling.
Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate
disposal of your eventual waste.
Battery:
* The crossed-out dustbin signifies that the battery should not be disposed of with general household waste.
Packaging:
The mobius loop symbol signifies the labeled packaging material is recyclable.
The green point symbol signifies that a financial contribution has been made to the associated national
packaging recovery and recycling system (e.g EcoEmballage in France).
The chasing arrows symbol on the plastic tray and plastic bag indicate that the materials are recyclable and also
identifies the plastic material.

DECLARATION OF CONFORMITY

Declare that the product Kala 200 DECT handset (HS 6830) is in compliance with ANNEX III of the R&TTE-Directive 99/05/EC and then
with the following essential requirements:
Article 3.1 a : (protection of the health & the safety of the user) EN 60950 (92) Ed.2 + amendments 1,2 (93) ; 3 (95) ; 4 (97) and 11 (97)
Article 3.1 b : (protection requirements with respect to electromagnetic compatibility) ETS 300 329 (97)
Article 3.2 :
(effective use of the radio spectrum) TBR6 (97)
The presumption of conformity with the essential requirements regarding Council Directive 99/05/EC
is ensured.
8
Date:18/01/2001
23/02/01
All manuals and user guides at all-guides.com
ENVIRONMENT AND SECURITY
Le Mans
18:30
Page 8
We,
Cordless Business Director
PHILIPS Consumer Communications
Route d'Angers 72081
Le Mans Cedex 9
France

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Td6830

Tabla de contenido