Additional Functions - BMR The Flex Arms Manual De Usuario

A
DDITIONAL FUNCTIONS
Information Button ( i )
Press the information button (Fig. a) any time during a
session to see the highest intensity level you have reached
for that session. Pressing the information button twice
shows you the total number of sessions you have
completed. While pressing the information button three
times identifies the product type you are using.
Mute Function ( Mute Function ( ) )
If you want to switch off your product's sound effects,
press and hold the program button for two seconds
(Fig. b). The mute function remains active indefinitely
unless manually changed. Deactivate the mute function
by again pressing the program button for two seconds
Keylock Function ( Keylock Function ( ) )
If you find a comfortable exercise intensity, press and
hold the information button for two seconds to lock
that intensity (Fig. c). This function only remains active
during the session in which it is activated. If you wish
to increase the intensity further, deactivate the keylock
function by again pressing the information button for
two seconds.
10
Error Messages
Fig. a
In the unlikely event of your product developing a problem,
"Err" will appear on the display (Fig. d). If this occurs you
should switch the controller off and then switch it back
on again. It should now operate properly. If the problem
persists, please call Customer Care for further assistance:
Phone US: (855) FLEXGEAR / (855) 353 - 9432
International: (310) 362 - 0581
Fig. b
Email: info@flexgear.com
Battery Power / Replacing the battery
The battery icon on the display will flash when the
battery is low and needs to be recharged. After a period
of time, you may find that your battery will only power
Fig. c your controller for a limited number of sessions, requiring
you to charge the battery more frequently. This is because
rechargeable batteries have a limited number of charge
cycles and may eventually need to be replaced.
Should you need to replace the rechargeable battery,
remove the small rubber plug from the back cover of
your controller (Fig. e), unscrew the back cover and
remove it. Replace the existing battery pack with a
new battery pack (Fig. f) and replace the battery cover.
You can purchase a new battery pack by visiting
www.theflexbelt.com or calling Customer Care.
Fig. d
Fig. e
Fig. f