Edit Channel; Delete All; Configuration; Osd - i-joy TDT Zeus Manual De Usuario

Press Up/Down keys to choose the cannel, then press the numeric keys 1-8 on the
remote controller to set the channel to the corresponding channel group.
Press EXIT to exit the current menu and save the operation about channel editing.

4.2.4 Edit Channel

You can enter the Edit Channel via Main Menu  Digital TV  Channel Manager 
Edit Channel, see the figure below:
In this edit channel menu, you can Add, Delete and Rename the channels.
a) Press the red key on the remote controller to enter the Add Channel menu.
You should set the 6 parameters to add one channel as follows:
Area Name :For Area Name, press the Right key to enter the Area Name list on the
right ,then press Up/Down keys to choose the area name and press
ENTER key to confirm;
Carrier: Press Left/Right keys to choose;
Channel Name: Press Left/Right keys to enter the Rename Channel page.
Audio PID, Video PID, PCR PID: Press 0-9 numeric keys to change values.
Press ENTER key to confirm the setting and return to Edit Channel menu.
Press EXIT key to return to Edit Channel page.
b) Press the yellow key to enter the Edit Channel menu. How to edit the channel
please refer to the operation of adding channel.

4.2.5 Delete all

If you do not like all the TV or Radio channels, you can enter Delete All menu to
choose to delete all TV, Radio channels and the carriers.
You can enter the Edit Channel via Main Menu  Digital TV  Channel Manager 
19
All manuals and user guides at all-guides.com
Delete All. Note before you entering into the Delete All menu, you should input the
password " 0000"(the default). See the figure below:
Use Up/Down keys to select the item then press ENTER to select to delete the
channels or cancel the operation then press ENTER to confirm.

4.3 Configuration

Configuration provides individualized system setup function. You can configure the
system according to your own hobby and demand. Enter the Configuration menu via
Main Menu  Digital TV  Configuration, as shown below:

4.3.1 OSD

Select OSD item in Configuration menu and press ENTER to enter into the OSD menu.
All options are listed on the left of the OSD menu. Press Up/Down keys to move upward
and downward to choose the item in the OSD menu.
OSD --- Sets the system menu mode;
20