KTM Power Parts 93505999000 Manual De Instrucciones página 5

Scope of supply
1x slip-on main silencer
1x bracket clamp
1x mounting kit
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
- Let the exhaust system cool down. Do not touch hot parts.
Assembly
- Remove screw .
- Release screw .
- Remove the main silencer.
NOTE
Make sure that the original bush kit remains in place.
- Mount main silencer (included).
- Position bracket clamp (included).
Both bracket clamp catches are positioned on the inside.
- Mount screw, washers and nut
not tighten yet.
- Position exhaust clamp and tighten screw
- Tighten screw to 18 Nm.
When you fi rst use the main silencer, keep the engine speed
low for about 5 minutes to warm the main silencer evenly. This
is the only way to ensure that the rock wool will reach its full
effectiveness and keep noise down to the required level!
(included in mounting kit) but do
to 20 Nm.
5