Care And Cleaning - Kenwood kMix triblade HB850 Serie Instrucciones

Ocultar thumbs Ver también para kMix triblade HB850 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
40534 Iss 3 HB850_HB890 multi A5:18288 Iss 2 HB790 multi
E Metal Masherpro™ (if supplied)
important
Never use the masher in a saucepan over direct heat.
G
Always remove the saucepan from the heat and allow
to cool slightly.
Do not tap the masher on the side of the cooking
G
vessel during or after mashing. Use a spatula to
scrape excess food away.
For best results when mashing never fill a saucepan
G
etc., more than half full with food.
to use the masher
The masher comes with two screens which can be
G
used as follows:-
Coarse screen - to mash cooked vegetables such
as potatoes, swede, yams and carrot.
Fine screen - to mash cooked or soft fruits and
vegetables.
Don't mash hard or uncooked foods you may
G
damage the unit.
1 Cook hard vegetables and fruit and drain first before
mashing.
2 Fit the masher collar to the masher shaft by turning in
a clockwise direction until it locks in position
3 Fit either the coarse or fine screen to the masher
shaft – turn clockwise to lock
4 Turn the masher upside down and fit the paddle over
the central hub and turn anti-clockwise to secure
(If the collar is not fitted then the paddle
will not secure in place).
5 Fit the power handle to the masher assembly - push
to lock.
6 Plug in.
7 Place the masher in the saucepan or bowl etc. and
select speed 1 to 2 on the speed control and then
press the on button. Move the masher in an up and
down movement throughout the mix until the desired
result is achieved. Increase the speed if required.
8 After use release the on button and unplug.
9 Press the blender shaft release buttons to release the
masher assembly.
10 Remove the paddle from the masher by turning
clockwise.
11 Remove the screen by turning anti-clockwise and
then lift off.
12 Unscrew the collar from the masher shaft.
optional attachment (not supplied in pack)
Mini chopper - refer to "service and customer care"
section to order.

care and cleaning

G
G
G
G
G
G
G
G
G
G
bl
.
bm
G
.
bn
.
G
7
A5
4/6/14
Always switch off and unplug before cleaning.
Don't touch the sharp blades.
Some foods, eg carrot, may discolour the plastic.
Rubbing with a cloth dipped in vegetable oil helps
remove discolouring.
power handle, food processor lid, whisk
collar, masher collar and masher shaft
Wipe with a slightly damp cloth, then dry.
Never immerse in water or use abrasives.
Do not dishwash.
blender shaft, soup blender
either
Part fill a suitable container with warm soapy water.
Plug into the power supply, then insert the blender
shaft and switch on.
Unplug, then dry
or
Wash the blades under running water, then dry
thoroughly
Never immerse in water or allow liquid
inside the shaft. If water does get inside,
drain and allow to dry before use.
Do not dishwash.
knife blade, slicing/grating disc, disc drive
shaft, wire whisk, food processor bowl,
masher paddle and screens, pushers,
blade/dust covers, non slip removable base
and storage unit
Wash up, then dry
12:26
Page 7

Publicidad

Tabla de contenido
loading

Tabla de contenido