BALDR B0367WST2H2R-V1 Manual Del Usuario página 10

Time zone
（WWVB)
-5 EST
Set Automatic Time
RCC Receiving Conditions:
1. After RF signal receiving, it will start searching radio signal for 7
minutes with the antenna symbol "
2. There are daily automatic DCF receiving at 1:00AM,2:00AM,
3:00AM, 4:00AM, 5:00AM. It will first start receiving DCF time at
1:00AM, 2:00AM, 3:00AM each day. If DCF time is not received
till 3:00AM, it will start receiving again at 4:00AM and 5:00AM. If
the time is not successfully received at 5:00AM, there will be no
receiving the day, It will start searching for signal at 1:00AM the
next day.
3. On normal time mode, press "WAVE'' button to enter DCF/WWVB
signal receiving.
4. During RCC reception, press"WAVE'' button to exit RCC receiving.
5. The time will be converted to the current time of corresponding
time zone after receiving the RCC .(Except 0 time zone)
Remark:
It will exit RCC receiving automatically when the alarm is per-
●
formed during RCC reception , you can repeat step 3 to enter
RCC signal receiving after turning off the alarm.
RCC symbol display:
a. When receiving signal , RCC icon
b. When signal successfully received, LCD will display complete
RCC icon
c. If no signal is received, the RCC icon will disappear.
Date
Alarm
Format
Time
(DCF)
AM7:00
D/M
(OFF)
and exit RCC receiving.
Date
Format
(WWVB)
M/D
''displaying on screen
will be flashing by"1HZ"
10