BALDR B0367WST2H2R-V1 Manual Del Usuario página 11

SET MANUAL TIME
1. After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting requirements.
Please check the following steps. Or if there is no signal received,
you can follow bellow steps for manual setting.
2. Press and hold "SETC/F" button to enter into setting, press
"SETC/F" button to skip setting steps or go to the next setting
option,the setting data will be flashing in 1Hz.
3. Press "SETC/F" button to select Weekday Language. Press the
"CH/▲" or "MEM/▼" button to select languages: EN、 GE、 FR、 IT、
DU、 SPA、 DAN optional . (English/German/French/Italian/Dutch/
Spanish/ Danish),Default setting :GER(DCF),ENG(WWVB)
4. Press "SETC/F" button to select key tone ON/OFF,Press "CH/▲"
or"MEM/▼"button to select.Default setting : key tone ON
5. Press "SETC/F" button to select temperature Unit.Press "CH/▲" or
"MEM/▼" button to select ℃ or ℉.Default setting : ℃.(DCF) ℉
(WWVB)
6. Press "SETC/F" button to select the RCC. Press "CH/▲" or
"MEM/▼" button to select OFF or ON. Default setting : RCC ON.
7. Press "SETC/F" button to select DST. Press "CH/▲" or "MEM/▼"
button to select DST mode from DST ON to DST ALWAYS to
DST OFF.
8. Press "SETC/F" button to select Time Zone. Press "CH/▲" or
"MEM/▼" button to select time zone from -12 H to + 12 H.Default
setting : 0 hr(DCF) -5EST(WWVB)
9. Press "SETC/F" button to select Year. Press "CH/▲" or "MEM/▼"
button to adjust the value.
10. Press "SETC/F"button to select date display mode. Press
"CH/▲" or "MEM/▼"button to select D/M or M/D mode .Default
setting : D/M(DCF) M/D(WWVB)
11. Press "SETC/F"button to select Month. Press"CH/▲" or "MEM/▼"
button to adjust the value.
12. Press "SETC/F" button to select date. Press "CH/▲" or "MEM/▼"
button to adjust the value.
11