LED Indicator Lights : Normal Operation And Fault Conditions
Cool
Dry
Sleep
ON
* Dry mode = Cool mode at low fan
Dry Mode
•
When the air humidity is high, the unit can operate in
dry mode. Press <MODE> button and choose <DRY>.
•
If the room temperature is 2°C higher than the set
temperature, the air conditioner will operate under
cooling mode until it reaches within the 2°C range of
difference compared to the set temperature before it
converts to dry mode.
•
If the room temperature is within the 2°C range of
difference compared to the set temperature, it will
directly operate under dry mode.
•
The unit will operate at LOW speed under dry mode.
Fan Speed And Rated Cooling Capacity
•
The rated cooling capacity is provided at the maximum
fan speed.
•
The cooling capacity is lower when the unit is operating
at MEDIUM and LOW fan speed.
Cooling unit
Ts °C/°F
Temperature
Minimum indoor
19.0 / 66.2
temperature
Maximum indoor
32.0 / 89.6
temperature
Minimum outdoor
19.4 / 66.9
temperature
Maximum outdoor
46.0 / 114.8
temperature
All manuals and user guides at all-guides.com
Operation / Fault Indication
Heat
Fan
Cool mode
(red)
Heat mode
Fan mode
(green)
Dry mode
Room sensor missing
Pipe sensor missing
ON or OFF
AIR CONDITIONER UNIT OPERATION
OPERATING RANGE
Heat Pump Unit
Th °C/°F
14.0 / 57.2
23.0 / 73.4
-
-
Ts: Dry bulb temperature.
1-6
Horizontal Air Flow Control
•
For more effective air circulation, you can manually
adjust the air discharge grille to the left or right.
•
During cool mode operation and dry mode operation,
do not direct the air discharge louver downwards for too
long. If operating continues in this way, condensation
may occur on the louver, thus resulting in drippings.
Horizontal
25°C
Ts °C/°F
Temperature
Minimum indoor
16.0 / 60.8
temperature
Maximum indoor
30.0 / 86.0
temperature
Minimum outdoor
-8.0 / 17.6
temperature
Maximum outdoor
24.0 / 75.2
temperature
Action
–
–
–
–
–
–
Blinking
Th °C/°F
-
-
-9.0 / 15.8
18.0 / 64.4
Th: Wet bulb temperature.