User Guide - Dantherm CDT 30 MK III Manual Del Usuario

User guide

Switching on/off
and operating status
Internal hygrostat
operation
External hygrostat
operation
12
The table below shows operation of the on/off function and display texts.
Key
ON – constant operation
INT HYG ON – operation controlled by internal hygrostat
INT HYG STOP, if internal hygrostat set point is reached
EXT HYG ON – operation controlled by external hygrostat
EXT HYG STOP, if external hygrostat set point is reached
Switch off
The green LED indicates active dehumidification
The table below shows operation of the hygrostat function and display texts.
Step Key
Press and hold
Press
(when flashing)
If an external hygrostat is connected, the machine will automatically switch over to us-
ing it,
Any adjustment of the set point must now be made on the external hygrostat. (once the
set point is reached, the display will show EXT HYG STOP)
Display
HYG SET RHxxx% - will flash for 5 seconds. The dehumidi-
fier will then switch to internal hygrostat controlled opera-
tion with set point
(once the set point is reached, the display will show INT HYG
STOP)
Press +/- briefly when flashing to set the RH% value. The
new value will be saved after a further 5 second period after
the last key is pressed.
HYG OFF will flash. Setting is stored after 5 seconds. The
dehumidifier will then switch to constant operation.
Feedback
Continued on next page