Bosch Rexroth LU 2 Instrucciones De Montaje página 86

32/54 Assembly
Please note:
• Set the delivery volume
(see page 17 and 20),
before removing the
plug and screwing the
lubrication unit in the
support bracket.
• The oil container may only
be bolted 1 x.
• Oil may leak from the
oil container during the
following operations.
1. Label the oil container
with the assembly and
the expiration date.
2. Remove the oil
container plug.
3. Screw the lubrication
unit by hand into the
support bracket (E).
4. Close the holder (D).
5. Remove the protective
cap.
6. Connect the connection
cable to the lubrication
unit.
Please note:
• After connecting the
power cable and with
supply voltage present,
the LED indicators fl ash
green (GN) in 5s intervals.

• A fl ashing arrow icon
appears in the display.
• The lubricating unit is ready
for operation with the
parameters previously set.
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2018-12
GN
D
4
E
Fig. 11: Install drive with oil container LC 2 in support bracket
Please note:
Only in impulse mode: After re-establishing the supply voltage a delivery process is
carried out. During the delivery the drive and the LED indicators fl ash at 1s intervals.
2
6
5
GN
4
3
1
1...
2
358 814-22