1) Lay the open end of the bag as far into the appliance so that the opening
of the bag is located centrally under the lower seal ring 3. The bag should
be inserted no further than the rear limiters 6 and must lie between the front
limiters 7. Otherwise the vacuuming and sealing will not function correctly:
2) Close the appliance lid 1. Ensure that both corners of the appliance lid 1
click into place. If necessary, press them down once again on the markings
and
NOTE
►
Make sure that neither the upper w nor the lower sealing ring 3 is
damaged. Otherwise the appliance cannot suck the air out of the bag.
►
If either one of the sealing rings 3/w is damaged, then simply pull it out
of the groove and press the replacement sealing ring into the groove.
3) If necessary, select the appropriate additional function for your food.
Otherwise, you can skip this step and move on to point 4):
SVEB 160 B2
so that the appliance lid 1 clicks into place and locks shut.
GB │ IE
│
13
■