Installing The Mounting Bracket - minkaAire Mojo II Manual De Instrucciones Certificado De Garantia

INSTALLING THE MOUNTING BRACKET

3
Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters;
electrical tape.
OUTLET BOX
WARNING: All of the parts, hardware and components have been provided for your safety
and the proper installation of your new ceiling fan. The use of other parts, hardware or
components not supplied by Minka Aire® with the fan will void the Minka Aire® Warranty.
MOUNTING BRACKET
REMEMBER To turn off the power. Follow the steps below to hang your fan properly.
Step 1. Attach the mounting bracket to the outlet box with two screws and washers provided
with the outlet box. Make sure the bracket is tight and secured. (Fig. 1)
Step 2. Lift fan into position by hanging the motor assembly onto the hook from the ceiling
FAN MOTOR ASSEMBLY
mounting bracket allowing it to hang freely. (Fig. 1)
Fig. 1