Symbols On The Appliance; Before FIrst Use; Filling The Water Tank - Silvercrest SDBB 2400 A1 Instrucciones De Uso

Symbols on the appliance

Before first use
1) Fill the water tank with water (See the section Filling the water tank).
2) Insert the plug into a mains power socket supplying an electrical current
corresponding to that given on the rating plate.
3) Set the steam control
4) Turn the temperature controller
flashes while the appliance heats up. As soon as the set temperature is reached,
the control lamp
5) Press the steam blast button
out of the soleplate
6) Iron over a piece of scrap material, to remove any production residues that
may remain on the soleplate

Filling the water tank

RISK OF ELECTROCUTION!
► Always disconnect the plug from the mains socket before filling the water
tank. There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before filling the water tank.
Otherwise, there is risk of burns!
SDBB 2400 A1
Symbol
3
to the highest level
6
7
lights up. Wait until the control lamp
0
.
0
Meaning
Power output (2400 W)
Continuous steam volume (40 g/min)
Ceramic-coated soleplate
Self clean
Automatic switch-off
( maximum steam).
to the highest level max. The control lamp
4
a couple of times so that steam comes
.
7
7
lights up.
GB │ MT │
61 ■