After Operation; After Operation Safety; Hauling The Machine - Toro 58601 Manual De Instrucciones

After Operation

After Operation Safety

General Safety
•
Shut off the machine and wait for all moving parts
to stop before you leave the operator's position.
Disconnect the spark-plug wire, keep it away from
the plug to prevent accidental starting, and allow
the machine to cool before adjusting, fueling,
unclogging, servicing, cleaning, or storing the
machine.
•
Clean debris from the machine to help prevent
fires. Clean up oil or fuel spills.
Hauling Safety
•
Disconnect the wire from the spark plug before
loading the machine for hauling.
•
Use care when loading or unloading the machine.

Hauling the Machine

DANGER
When transporting the machine inside an
enclosed space inside a vehicle, fuel and fuel
vapors may ignite and cause serious injury
or death.
Transport the machine in an upright position
in an open vehicle or remove fuel from the
machine.
Ensure that the fuel cap is tight and transport the
machine in an upright position in an open vehicle.
Secure the machine from movement.
If fuel is present in the fuel tank and you must transport
the machine in an enclosed vehicle, continue as
follows:
1. Drain the fuel into an approved fuel container.
2. Start the machine and run it until it shuts off.
3. Wipe away any fuel spills and allow the machine
to dry.
4. Tightly screw on the fuel cap.
5. Secure the machine from movement.
14