Using The Card Reader; Inserting A Memory Card; Removing A Memory Card - Plextor 102894 Manual Del Usuario

Manual Ejection
If the Eject button fails to work properly, insert a paper clip
into the Pin Hole Eject to open the tray.
Note:
Be sure that the drive is turned off before performing the manual
ejection.

Using the Card Reader

The card reader supports SD, SDHC, and MMC memory cards.

Inserting a memory card

1. Connect the AC/DC adapter.
2. Turn on the drive and insert a disc into the tray. Refer to
page.
3. Insert a memory card into the memory card slot.
4. The drive automatically detects the memory card and a message similar to "
Press to Start" should appear on the LCD display.
To copy the memory card data, refer to "Backup from Memory Card to Disc" on page 18.
Note:
•
If there is no disc inserted into the drive, an "
display.
•
The displayed message varies depending on the connected device, current operation, and disc type.

Removing a memory card

Pull the memory card out from the slot.
"Placing a Disc" on the previous
SD -> Disc. Insert Disc" message appears on the LCD
SD -> DVD+R.
13