Antec OVERTURE II Manual Del Usuario página 7

Ocultar thumbs Ver también para OVERTURE II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

or Low to a fan-control device may result in the fan not being able to start. The already lowered
voltage from the fan control device will be further reduced by the TriCool circuitry below 5V.
Specifications:
Size:
92 x 92 x 25.4 mm
Rated Voltage:
DC 12V
Operating Voltage: 10.2V ~ 13.8V
Input
Speed
Current
High
0.24A
2200 RPM
(Max.)
Medium
0.1A
1600 RPM
Low
0.08A
1200 RPM
The 75 mm x 30 mm Blowers
This case comes with two 75mm x 30mm blowers preinstalled underneath the 3.5" internal HDD
drive cage to provide additional cooling to the case. The blowers fan speed is 1600 RPM. Connect
the 4-pin Molex connector to the power supply to power the blowers.
The case includes two ventilated, pre-installed PCI slot covers. Along with the dual fans and
ventilated top panel, the ventilated slot covers act to help keep your case cool. We recommend
moving these ventilated slot covers if necessary (depending on your choice of PCI and AGP
cards) so that both ventilated covers remain installed near the graphics card.
All manuals and user guides at all-guides.com
Static
Air Flow
Pressure
1.08 m³/min.
1.04 mm-H
(38 CFM)
(0.08 inch-H
1.09m³/min.
0.49 mm-H
(28 CFM)
(0.02 inch-H
0.60 m³/min.
0.27 mm-H
(21 CFM)
(0.01 inch-H
6
Acoustical
Input
Noise
Power
O
2
27 dBA
1.4 W
O)
2
O
2
21 dBA
1.2 W
O)
2
O
2
0.96 W
14.6 dBA
O)
2

Publicidad

Tabla de contenido
loading

Tabla de contenido