LAVAZZA CLASSY PLUS Instrucciones De Empleo página 25

Ocultar thumbs Ver también para CLASSY PLUS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Milk does not foam.
The milk-based beverage
temperature is too hot.
The milk-based beverage
temperature is too cold.
Noisy operation of the
cappuccino maker during the
preparation with milk
TROUBLESHOOTING
Possible causes
» Milk unsuitable for use.
» Too hot milk temperature.
» Beater coil not fitted into place.
» Insufficient amount of milk fed
with respect to the selected /
desired amount.
» Excessive amount of milk fed
with respect to the selected /
desired amount.
» Milk shipping beater incorrectly
fitted into place..
Solution
» It is recommended that whole
milk (pasteurized or UHT-
treated) and / or cold skimmed
milk from the fridge of 39.2 to
46.4°F (4 to 8°C) should be
used.
» Use milk at the fridge temperature
(i.e. ranging between 39.2 to
46.4°F (4 to 8°C).
» Make sure that the beater
coil has been fitted into place
correctly.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Add more milk by following the
indications of the icons on the
milk jug.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Decrease the amount of milk by
following the indications of the
icons on the milk jug.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Fit the milk whipping beater
into the correct position, as
shown in the Manual.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
EN
25

Publicidad

Tabla de contenido
loading

Tabla de contenido