Technical Data - Hazet WERK 9065/6 Manual Del Usuario

USA GB
Air inlet
Impact rate
Chisel insert
Stroke length
Number of chisels
Weight
Recommended air hose diameter
Air consumption
Working pressure
Sound pressure level Lp A
Sound power level LpW
Vibration acceleration
The HAZET pneumatic chisel hammer is a handy tool driven with compressed air. It has been
designed for the manual use. It is suitable for the processing of sheet metal for applications like
separating , hitting off bolts etc., for working on brickwork, autoclaved aerated concrete, hollow
blocks, gypsum boards, pumice stone, slag bricks or on similar materials.
The reduced weight of the chisel hammer facilitates even a prolonged use without difficulties. A
great expenditure of force is not necessary.
The air regulation allows a progressive adjustment of the impact power according to the particu-
lar requirements.
The 6-point chisel insert prevents the chisel from twisting. For this reason the chisel is guided in
an optimal way.
Thanks to the ergonomic, cold-insulated rubber handle the hands are protected from getting
cold and the vibrations are strongly dampened. The chisel hammer's non-slip handle provides a
good grip.
The chisel insert is locked with swivel nut.
The air exhaust is on the frontside.
The connection is effected through a quick-release coupling.
Do not leave plugged-in pneumatic tools unattended.
Always wear personal protective clothing and safety equipment.
8
All manuals and user guides at all-guides.com

Technical Data

Proper
Application
Technical data are subject to change without notice
9035/6
1 ⁄ ˝
4
3000 impacts/min
10 mm 6-point
67 mm
5 pieces
3 kg
10 mm
240 l/min
6.3 bar
98 dB(A)
107.5 dB(A)
13.8 m/s 2