For Your Safety - Hazet WERK 9065/6 Manual Del Usuario

All manuals and user guides at all-guides.com
Dear Customer,
You have made a good choice.
This HAZET tool in front of you is
a high-quality product that will
make your work easier.
General information
safety tips:
• Before using the tool, please take care that
the user of this tool reads carefully through
these operating instructions and under-
stands all information given in there.
• These operating instructions contain impor-
tant advices that are necessary for a safe
and trouble-free operation of your HAZET
pneumatic chisel hammer.
• For this reason, always keep these operating
instructions together with your HAZET pneu-
matic chisel hammer.
• This tool has been designed exclusively for
particular applications. HAZET emphasizes
that any modification of this tool and/or an
application that does not correspond to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damages to property that are due
to an improper application or misuse of this
tool respectively due to the disregard of the
safety instructions.
Attention: Please pay attention to these
symbols!
Read the Operating Instructions!
The operator is obliged to observe
the operating instructions and has to
instruct all users of the pneumatic
tool according to the information
given in these operating instructions.
Attention!
This symbol marks important specifi-
cations,
safety risks and safety advices.
Do not leave plugged-in pneumatic tools unattended.
Always wear personal protective clothing and safety equipment.

For Your Safety

and
dangerous conditions,
Technical data are subject to change without notice
• Wear work gloves and eye protection.
Pneumatic tools can raise chips, dust and
other abraded particles at high speed, what
may result in
Compressed air is dangerous. The air flow
may cause harm to sensitive parts of the
body like eyes, ears etc. Dust and objects
being raised by the air flow may cause inju-
ries.
• Wear ear protection. Long exhibition to the
working noise of a pneumatic tool may result
in a permanent hearing loss.
• Wear face or dust mask. Breathing in the
steam of some materials like adhesives and
tar that contain dangerous chemicals may
cause serious harms.
• Wear work gloves. When operating the tool
vibrations are produced that are transmitted
from the device to the user. For this reason,
it is absolutely necessary to wear work
gloves.
• Keep children away from pneumatic
tools. Unattended tools or tools that are
connected to the compressed air supply
may be used by non-authorized persons and
could injure them or other persons.
• Do not use the tool in explosive atmos-
phere. Impact tools like chisel hammers can
produce sparks that may ignite combustible
materials. Never operate tools in proximity to
combustible substances like petrol, naphtha,
detergents etc. Work in well-cleaned and
well-ventilated areas only. Keep combustible
materials out of the work area. Never use
oxygen, carbon dioxide or other bottled
gases to power pneumatic tools.
• Do not point the chisel hammer at any
person, at any animal or at yourself. When
operating the tool keep children and other
persons out of the work area.
• Do not let the tool work in no-load opera-
tion. Chisels may break off and could be
flung throughout the work area and hit the
user or other persons.
• Disconnect air hose when changing chi-
sels. For oiling the tool or for changing chi-
sels, always disconnect the tool from the air
supply.
• Pneumatic tools must not get in contact
with sources of electricity.
• Pay attention to the working pressure,
USA GB
severe eye injuries.
9