Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
MAINTENANCE
OTHER MAINTENANCE. WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various
types of commercial solvents and may be damaged by their use. Use only mild soap and
damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
• When electric tools are used on fiberglass boats, sports cars, drywall etc.,they are subject
to accelerated wear and possible premature failure, as the fiberglass chips and grindings
and drywall dust are highly abrasive to bearings, brushes, commutator, etc. During any
use on fiberglass or drywall it is extremely important that the tool be cleaned frequently by
blowing with an air jet.
Your tool was properly lubricated before leaving the factory. Once every year take or
LUBRICATION
send your tool to a Stanley FatMax service center, or authorized service station, for a
complete cleaning, inspection and lubrication. Tools "out of service" for long periods
should be relubricated before being put back to work.
THE RBRC™ SEAL
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid
by Stanley FatMax.
RBRC™ in cooperation with Stanley FatMax and other battery users, has
established programs in the United States to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the
spent lithium-ion battery to an authorized Stanley FatMax service center or to your local
retailer for recycling. You may also contact your local recycling center for information on
where to drop off the spent battery.
Battery Recycling Corporation.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website at
www.stanleytools.com. You can also order parts from your nearest Stanley FatMax Factory
Service Center or Stanley FatMax Authorized Warranty Service Center. Or, you can call our
Customer Care Center at (800) 262 2161.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For
information about Stanley FatMax, its factory service centers or authorized warranty
service centers, visit our website at www.stanleytools.com or call our Customer Care
Center at (800) 262 2161. All repairs made by our service centers are fully guaranteed
against defective material and workmanship. We cannot guarantee repairs made or
attempted by others.
You can also write to us for information at Stanley Tools, 701 E. Joppa Road, Towson,
Maryland 21286 - Attention: Product Service. Be sure to include all of the information
shown on the nameplate of your tool (model number, type, serial number, etc.).
ACCESSORIES
not been tested with this product, use of such accessories with this tool could be
WARNING:
hazardous. To reduce the risk of injury, only Stanley FatMax recommended accessories
should be used with this product.
A complete line of accessories is available from your Stanley FatMax Factory Service
Center or a Stanley FatMax Authorized Warranty Service Center. Please visit our Web
Site www.stanleytools.com for a catalog or for the name of your nearest supplier.
REMOVE BATTERY FROM SAW WHEN PERFORMING ANY CLEANING OR
RBRC™ is a registered trademark of the Rechargeable
Since accessories, other than those offered by Stanley FatMax have
11
Publicidad
Tabla de contenido
