Wi-Fi Protected Setup (Wps) - Wren V5PF Guía De Preparación

Connect to your network — Option B
WiFi Protected Setup (WPS)
WiFi Protected Setup (WPS) is a feature on some WiFi routers that allows the Wren V5PF
speaker to automatically and securely connect without needing to enter a password. WPS is
not a standard feature on all routers, and only one Wren V5PF speaker can be set up at a time.
Check your router's owner manual to see if WPS is a feature, or look for a button on your
router marked with the WPS logo
WiFi Setup. (See "Option A" in the prior section.)
If your router has WPS, you can follow the WPS instructions in the Wren Play-Fi App, or use
the following instructions.
Plug in the Wren V5PF speaker near
your router. Wait approximately
20 seconds for the speaker to fully
power on (when the power indicator
light stops blinking).
10
. If your router does not have WPS, then use Standard
solid white
Press the setup button on the rear
of the product two times. The WiFi
indicator will blink amber two times,
then pause every second. The speaker
is now in WPS Mode.
blinking
amber