Wren V5PF Guía De Preparación página 9

Setting Up Wren V5PF Speakers
After Launching the App
The Wren Play-Fi App looks for devices
in Standard WiFi Setup Mode when it is
launched. If you launch the app before
connecting the speaker to the WiFi network,
go to the app's home screen, select
"Settings" and then "Add Play-Fi Device."
Manually Enabling WiFi Mode
You may need to manually enable the
speaker's WiFi Setup Mode if any of the
following conditions apply:
• If this is not your first time setting
up the speaker
• If you're in a new location with
a different WiFi network
• If you want to switch from your current
WiFi network to a different one
Selecting a Different WiFi Network
If you want to connect the speaker to a
different WiFi network, open the Wren
Play-Fi app and press the "Alternative
Network" button on the "Enter Network
Password" screen.
To manually enable WiFi Setup Mode, hold
down the setup button on the rear of the
speaker for eight (8) seconds. The WiFi
light will blink once per second indicating
that WiFi Setup Mode is active.
blinking
amber
9