Publicidad
16
S
pecifications
Power Supply
Requirements
Frequency
Protection Class
Insulation
Ambient Operating
Conditions
Ambient Storage
Conditions
Control range
Accuracy
Sensor cables
Output ratings
Dimensions (H x W x D)
Directives
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond
these specifications, consult the local Johnson Controls office or representative. Johnson Controls shall not be liable for damages
resulting from misapplication or misuse of its products. This document is subject to change without prior notice.
Johnson Controls International, Inc.
Headquarters:
Milwaukee, WI, USA
European Headquarters:
Westendhof 8, 45143 Essen, Germany
European Factories:
Lomagna (Italy), Leeuwarden (The Netherlands) and Essen (Germany)
Branch Offices:
Principal European Cities.
This document is subject to change
Catalogue Section 9
All manuals and user guides at all-guides.com
Single phase 230 Vac ±10%
Three phase 400 Vac ±10%
50/60 Hz
IP 65
Class 2 when digital input switch and wire have a dielectric of 1300 Volts
0° to +40°C (32° to 104°F)
0 to 100 % RH (when properly closed)
-30° to +80°C (-22° to +176°F)
0 to 95 % RH (non condensing)
-40 to +70°C
± 1°C
2 meters
Compressor
Defrost
Fan
Door Frame Heater
Pump down
Alarm
Heater
275 x 220 x 140
12 Modules
380 x 220 x 140
18 Modules
275 x 370 x 140
24 Modules
380 x 370 x 140
36 Modules
EN 60439-1 Tested Type Appliance (TTA)
Not all power supplies are available in every
version. Please refer to selection tables.
See selection table
See selection table
See selection table
0,1 Amps 230 V ac
0,5 Amps 230 V ac
1 Amps 230 V ac
© 2000 Johnson Controls, Inc.
CR1
Printed in Europe
Publicidad
