Function Push Buttons; Call Volume Control; Configuration Switches - golmar T370ML Manual De Instalación

All manuals and user guides at all-guides.com
MONITOR DESCRIPTION
F
unction push buttons.
Push button to stablish / finish audio communication or intercom function (only available
on systems with additional monitor, for description and connection see page 44 & 45).
Push button to activate the lock release. During call reception, communication and
autoswitch-on processes, it allows lock release activation. During activation, the picture
will disappear from the monitor screen.
With system in rest ring tone selection monitor, for description see page
Push button for a
the door paneI during 40 seconds. In case of systems with two door panels, press the
button again to monitor the picture from the second door panel.
Push button to activate the auxiliary device. D
autoswitch-on processes
the picture will disappear from the monitor screen.
C
all volume
control.
The monitor allows to regulate the call volume from maximum to
minimum value, with the regulator placed in the right side of the
monitor.
C
onfiguration
switches .
The configuration switches are placed on the monitor base.
Master
*
On installation with one monitor only, set it as master;
Slave
On installations with two monitors, set as slave the monitor that is not connected
IMPORTANT: Modify the configuration switches
On installations with two monitors, set as master the monitor where the door
panel(s) is connected.
Factory default.
*
:
utoswitch-on. It allows to establish audio and video communication with
, activate the auxiliary device (see page 46). During activation,
on installations with two monitors, set as master the monitor where the door
panel(s) is connected and the other monitor as slave.
the door panel.
(
uring call reception, communication and
3
2
1
-
+ +
P2-
P2+
P1-
P1+
without the power connected.
41
44 ).
370S COLOR
M S