Screen Settings; Ring Tone Selection; Intercom Function - golmar T370ML Manual De Instalación

44
S
creen
settings.
During call reception, communication and autoswitch-on processes,
it allows adjust the b
screen with menu push button
and down
(see page 40).
370S COLOR 370S COLOR
Press the menú push button
contrast, colour and exit) options, to select one of these options
press up
button
adjust to the desired value.
M M S S
To save the desired value and exit, select the option exit and then press the menu
button to confirm.
R
ing tone
selection.
It's possible to select for each monitor between four different ring tones.
To select a ring tone (system in rest):
1. Press the push button
2. Press the push button
the desired ring tone.
3. To save the desired ring tone and exit press the push button
The monitor exit of the ring tone selection to the 40 seconds, saving the last
selected ring tone.
I
ntercom function.
370S monitor, incorporate as standard the intercom function between two monitors of
the same apartment. To enable this function check the following conditions:
- The monitor that is connected to door panel(s) has been configurated as
master and slave the other monitor.
- Link the 1, 2 and 3 terminals of the units (see page 45).
. .
To stablish an intercom communication press
acoustic tones will be reproduced confirming the call is in progress, the called
monitor will receive the call. To establish communication, press
the called monitor.
The communication will last for 80 seconds or until press
the monitors. If during an intercom communication a call is made from the door
panel, the intercom function will be cancelled, appearing the picture in both
All manuals and user guides at all-guides.com
rightness, contrast
, placed in the low left zone of the monitor,
, and will display the (brightness,
or down push buttons, then press the menu push
to confirm the selection and then press the up
to play the selected ring tone.
to play the next ring tone. Repeat this stage till find
MONITOR INSTALLATION
and colour of the
and select push buttons up
push button on the calling monitor:
or down push buttons to
.
. .
push button of
push button at any of
push