Display Indicators; Advice On How To Use The Remote Controller; Remote Controller Lock; Light Function - Vaillant VAI 6-025 WN Manual Del Usuario

7.2.2

Display indicators

16
15
14
13
12
11
10
Fig. 7.2 Overview of the buttons.
Legend
1 FAN SPEED indicator
2 TRANSMISSION indicator
3 X-FAN indicator
4 TEMPERATURE indicator
5 TURBO indicator
6 TIMER indicator
7 LOCK indicator
8 LIGHT indicator
9 SWING indicator
10 "TEMP" indicator
11 SLEEP indicator
12 HEAT MODE indicator
13 FAN MODE indicator
14 DRY MODE indicator
15 COOL MODE indicator
16 AUTO MODE indicator
VAI6-WN-U_EN - 10/13 - Vaillant
All manuals and user guides at all-guides.com
1
2
3
4
5
6
7
8
9
OPERATING INSTRUCTIONS
7.3 Advice on how to use the remote
controller
Follow the recommendations below as to how to use the
remote controller:
• When in use, direct the head of the signal transmitter
directly to the indoor unit receiver.
• Keep the distance between the transmitter and the
receiver within 7 m.
• Avoid obstacles between the transmitter and the receiver.
• If experiencing difficulties with the remote control
communicating with the indoor unit, reduce the distance
between the remote controller and the indoor unit.
• Do not drop, throw or hit the remote controller.
7.3.1

Remote controller lock

In order to lock the buttons and display of the remote
controller device:
• Press and hold the - & + buttons, at the same time for
over two seconds.
The rest of the buttons are deactivated.
The lock status indicator appears.
In order to deactivate the lock:
• Press and hold the - & + buttons, at the same time again.
The rest of the buttons are activated.
The lock status indicator disappears.
7.3.2

LIGHT function

Press the LIGHT button for less than 2 seconds to light the
display of the Indoor Unit. To switch the display back off,
press the LIGHT button for less than 2 seconds once again.
7.4

Switching the unit on and off

In order to switch the unit on:
• Press the ON button on the remote controller; the unit will
start to operate.
In order to switch the unit off:
• Press the OFF button on the remote controller; the unit
will stop.
EN
- 9 -