EOMAT PRO
14.2 Hydraulic components
Maintenance of the hydraulic unit, valves and cylinders should only be done by
qualified personnel.
14.3 Hydraulics diagram
See appendix
14.3.1 Checking the fluid level
Check the oil level regularly and fill if necessary.
14.3.2 Changing the hydraulic oil
Hydraulic oil H-LP 46 (Safety data-sheet, see chapter 18).
Required oil purity: Class 7 in accordance with NAS 1638
(filtered to 5 microns before filling)
It is recommended that you allow a Parker service technician to carry out an
oil change.
Unscrew the filler screw top.
(The filler screw top is fitted with a
dipstick) if needed top-up the oil to
the mark
Oil content: 4 litre
Seite
53
EOMATPRO/MANUAL