Clean The Dust Collector And Filter; Clean The Rolling Brush - EUFY RoboVac X8 Hybrid Manual Del Usuario

English

Clean the Dust Collector and Filter

1 Press the dust collector release button to pull the dust collector out.
Open and empty the dust collector.
2
3 Remove the filter.
4 Clean the dust collector and filter with the cleaning brush.
Rinse the dust collector and filter thoroughly with water.
5
1
min
36
Air-dry the dust collector and filter completely before next use. You may use
6
another filter if the original one is not dry.
24h
7 Place the filter back into the dust collector.
Push the dust collector back into the main unit.
8

Clean the Rolling Brush

1 Pull on the release tabs to unlock the brush guard as shown.
Lift the rolling brush to remove.
2
Clean the rolling brush with the cleaning tool.
3
Reinstall the rolling brush by inserting the fixed protruding end first and then
4
clicking into place.
Press down to snap the brush guard into place.
5
English
37