Changing The Dust Bag - Bosch VBBS700N00 Manual De Instrucciones

Changing the dust bag

If the dust bag change indicator in the cover is
completely yellow when the floor tool is lifted off the
floor and the highest suction setting is selected, the
dust bag must be replaced even if it should not be
completely full yet. In this case it is essential to change
the dust bag due to the type of material it contains.
The nozzles, suction pipe and flexible hose should not
be blocked, as this will also trigger the dust bag
change indicator.
Open the cover by moving the locking lever in the
direction of the arrow.
Seal and remove the MEGAfilt
pulling on the tab as shown.
12
All manuals and user guides at all-guides.com
® SuperTEX dust bag by
Place a new MEGAfilt ® SuperTEX dust bag in the holder
and close the dust bag compartment lid.
Caution: The cover only closes when a
MEGAfilt ® SuperTEXdust bag has been inserted.
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter in the
machine and close the dust compartment cover.
13