1.3
Symbols used
Only a qualified electrician may carry out opera-
tions marked with this symbol.
This symbol indicates an important note.
The symbol indicates additional, useful informa-
tion.
f This symbol marks a prompt for action.
This symbol marks a listing.
Î This symbol is used to refer to another section in this
manual.
This symbol is used to refer to another document.
This symbol is used to point out a result.
9
2. For your safety
2.1
Target groups
Owner
As the operator, you are responsible for the device.
You are responsible for proper and safe use of the device.
This includes instructing persons who use the device.
As an operator without specialist electrical training, you
may only carry out activities that do not require a qualified
electrician.
Electrician
As a qualified electrician, you have received
recognised electrotechnical training. Based on
this knowledge, you are authorised to carry
out the electrotechnical work requested in this
manual.
Requirements for qualified electricians:
Knowledge of general and special regulations pertain-
ing to safety and accident prevention.
Knowledge of electrotechnical regulations.
Knowledge of national regulations.
Ability to identify risks and avoid possible hazards.
2.2 Intended use
®
The AMTRON
is a charging station for use in private and
semi-public areas, such as private property, company car
parks or depots, access to which is limited.
The device is used solely to charge electric vehicles.
Mode 3 charging according to IEC 61851-1.
Plugs and sockets according to IEC 62196.
The unit is intended for permanent installation and for
indoor and outdoor use.
For Premium versions only: the device can be used as a
single charging point or in a group of several devices with
a back-end system. Several devices are connected via a
MENNEKES ACU. An ACU is installed in the MENNEKES
eMobility-Gateway and in a Smart charging column.
For Xtra versions only: the device can be operated as a
single charging point.
EN
3