Standard Equipment; Controls - RIDGID micro LM-400 Manual Del Operario

micro LM-400 Laser Distance Meter
* Range is limited to 229 ft (70m). Use a commercially available target plate to
improve measurement ability during daylight or if the target has poor reflective
properties.
** In favorable conditions (good target surface properties, room temperature)
up to 33 ft (10 m). In unfavorable conditions, such as intense sunshine, poorly
reflecting target surface or high temperature variations, the deviation over dis-
tances above 33 ft (10 m) can increase by ±0.0018 in/ft (±0.15mm/m).
Features
• Distance, Area, Volume Calculations
• Continuous Measurement
• Min/Max Distance Tracking
• Indirect Measurement, Using 2 or 3 Measurements
• Addition/Subtraction
• Stake Out Measurement
• Angle Measurement
• Beep Indication
• Display Illumination and Multi-line Display
• Self-Timer
• Bluetooth
® wireless technology

Standard Equipment

The RIDGID ® micro LM-400 Laser Distance Meter comes with the following items:
• micro LM-400 Laser Distance Meter
• Two 1.5 V, Type AA Batteries
Warning Label
Figure 1 – micro LM-400 Laser Distance Meter
Figure 2 – Back of micro LM-400 Laser Distance Meter

Controls

1. ON/MEAS Button
2. Bluetooth/Timer Button
3. MIN-MAX Button
4. Area/Volume Button
5. Addition (+) Button
6. Reference Button
7. Angle/Stake Out Button
8. Indirect Measurement Button
9. History Button
10. Subtraction (-) Button
11. Illuminating/UNITS Button
12. Clear/OFF Button
13. Side MEAS Button
• User Manual and Instruction CD
• Carrying Case
Warning
Label
1
2
3
4
5
6
13
Figure 3 – micro LM-400 Laser
Distance Meter Controls
7
8
9
10
11
12
5