Input Selection - Toshiba REGZA 20V300P Manual De Instrucciones

Defining the INPUT sockets so that the television recognises connected equipment. See page 7 for a clear
view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
B
An S in the display e.g. 2S (EXT 2S), indicates the
B
input is set for an S-Video signal.

Input selection

Use the Input Selection if the television does not switch
over automatically.
At any time by pressing OK a list will appear on
1
screen showing all stored programmes and
external equipment. Use up and down to
highlight and OK to select.
02
01
PC
B 3
B 2
1
B
05
04
PC displays a computer connected to Input
RGB/PC on the back of the television.
All manuals and user guides at all-guides.com
Input selection and
AV connections
BBC2
BBC1
CH4
INPUT signal selection
This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press down until
1
EXT2 input is highlighted, then press OK.
L a n g u a g e
C o u n t r y
A u t o t u n i n g
M a n u a l t u n i n g
Pr o g r a m m e s o r t i n g
P i c t u r e p o s i t i o n
E X T 2 i n p u t
B a c k
M E N U
With left or right select either CVBS (video) or
2
S-VIDEO as the required input for EXT2.
If the colour is missing try the alternative setting.
19 19
S E T U P
E n g l i s h
U K
OK
OK
OK
OK
C V B S
Wa t c h T V
E X I T