Toshiba REGZA 20V300P Manual De Instrucciones página 23

Q
Q
Why are there horizontal stripes and/or blurred
images on the screen when in PC mode?
A
The clock phase may need adjustment. Select
PC Setting from the SET UP menu, highlight
Phase and adjust until the picture clears.
Q
Why are there problems with text?
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the text is unreadable or garbled,
check the aerial. Go to the main index page of the text
service and look for the User Guide. This will explain the
basic operation of text in some detail. If further information
is needed on how to use text see the text section.
Q
Why are there no text sub-pages?
A
There are none broadcast or they have not yet
loaded. Press the
X
(See text section).
Cleaning the screen and cabinet...
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or
solvents on the screen or cabinet as this may cause damage.
Disposal...
The following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about
recycling of this product, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
All manuals and user guides at all-guides.com
uestions
button to access.
A
nswers
and
Q
Why are the four coloured text numbers visible
but no text?
A
Text has been selected whilst viewing an external
source i.e. DVD or VCR. No text will appear on
screen or a box may appear stating no information is
available. Select a broadcasting channel and press
/ /
6 7
Q
Why are the colours wrong when an NTSC
source is played?
A
Connect the source via a SCART lead and play.
Select Manual setting from the SET UP menu.
S t o r e
OK
M E N U
Set the Colour to Auto. and exit.
1
Go to the Picture settings menu and adjust
2
the tint.
23
continued
to access.
M a n u a l s e t t i n g
C o l o u r s y s t e m : A u t o
AV 1 A
B a c k Wa t c h T V
E X I T