Section 6: Appendices
APPENDIX 6: SPECIFICATIONS
Inputs
Connectors:
Type:
Impedance:
Max Input Level:
CMRR:
Input Gain Range:
MIDI:
Outputs
Connectors:
Type:
Impedance:
Max Output Level:
Output Gain Range:
MIDI:
A-D System Performance
A-D Conversion:
Convertor Dynamic Range:
Type IV™ Dynamic Range:
THD+Noise:
Frequency Response:
Interchannel Crosstalk:
D-A System Performance
D-A Conversion:
Dynamic Range:
THD+Noise:
Frequency Response:
Interchannel Crosstalk:
Compressor
Controls:
Limiter
Controls:
Expander/Gate
Controls:
All manuals and user guides at all-guides.com
Female XLR and 1/4" TRS (Pin 2 and tip hot)
Electronically balanced/unbalanced, RF filtered
Balanced >26 kΩ, unbalanced >13 kΩ
>+24 dBu balanced or unbalanced
>40 dB, typically >55 dB at 1 kHz
-∞ to +16 dB
5-Pin DIN MIDI Input Jack
Male XLR and 1/4" TRS (Pin 2 and tip hot)
Servo-balanced/unbalanced, RF filtered
Balanced 120 Ω, unbalanced 60 Ω
>+21dBu balanced/unbalanced into 2kΩ or greater
>+20dBm balanced/unbalanced (into 600Ω)
-∞ to +16 dB
5-Pin DIN MIDI Out/Thru Jack
24-bit, dbx Type IV™ Conversion System
109 dB typical, A-weighted, 22 kHz bandwidth
107 dB typical, unweighted, 22 kHz bandwidth
Up to 122 dB with transient material, A-weighted, 22 kHz bandwidth
Up to 120 dB with transient material, unweighted, 22 kHz bandwidth
Typically 114 dB with program material, A-weighted, 22 kHz bandwidth
Typically 112 dB with program material, unweighted, 22 kHz bandwidth
0.002% typical at +4 dBu, 1 kHz, input gain at 0 dB
20 Hz to 20 kHz, +0/-0.5 dB
< -85 dB at 1 kHz, input gain at 0 dB
24-bit
105 dB typical, A-weighted, 22 kHz bandwidth
102 dB typical, unweighted, 22 kHz bandwidth
0.002% typical at +4 dBu, 1 kHz, output gain at 0 dB
20 Hz to 20 kHz, +0/-0.5 dB
< -85 dB at 1 kHz, output gain at 0 dB
Variable Threshold, Ratio, Manual Attack/Hold/Release, Auto
Attack/Hold/Release, Output Gain, Selectable Hard Knee or OverEasy®
with adjustable VariKnee™
Variable Threshold, Attack, Release
Variable Threshold, Ratio, Attack, Hold, Release
37