Handling And Use; Making Basic Settings - Silvercrest SKR 800 B2 Instrucciones De Uso E Indicaciones De Seguridad

Handling and use

Making basic settings

Requirement: The device is in clock/standby mode.
NOTE
► If there is a suitably strong RDS signal (radio data system), the time and
date will be set automatically. Neither an adjustment of summer/winter time
is made automatically by the RDS nor does the station name appear on the
display
► Make the settings quickly. If you do not press a button for 15 seconds, the
entry is cancelled. All settings made up to this point are saved automatically.
♦ Press the
format (
Turn the −TIMER+ dial
♦
format (
NOTE
► If the 12-hour format (
from 12:00 PM until 11:59 PM. From 12:00 AM to 11:59 AM, nothing
appears on the display.
♦ Press the
Turn the −TIMER+ dial left or right to set the hours.
♦
♦ Press the
Turn the −TIMER+ dial left or right to set the minutes.
♦
♦ Press the
Turn the −TIMER+ dial left or right to set the year.
♦
♦ Press the
Turn the −TIMER+ dial left or right to set the month.
♦
♦ Press the
Turn the −TIMER+ dial left or right to set the date.
♦
♦ Press the
flashes on the display.
Turn the −TIMER+ dial left or right to turn the RDS function
♦
(Off). When the RDS function is turned on the signal is strong enough, the
time and date is corrected automatically if necessary.
│ GB │ MT
■ 78
All manuals and user guides at all-guides.com
.
button for about 2 seconds. The symbol for the 24-hour
) flashes on the display.
to switch between 24-hour (
).
) is set, PM appears in the upper left of the display
button to accept the setting. The hours flash on the display.
button to accept the setting. The minutes flash on the display.
button to accept the setting. The year flashes on the display.
button to accept the setting. The month flashes on the display.
button to accept the setting. The date flashes on the display.
button to accept the setting.
) and 12-hour
(RDS (radio data system))
(On) or
SKR 800 B2