X
BBBBBBBB
CCC
OTY
Command: PWD:XXXX,PARAMETER4%
[SMS message received]
ST:XXX;C1:XXXXXXXX,Y;C2:XXXXXXXX,Y;C3:XXXXXXXX,Y;C4:XXXXXXXX,Y;C5:XXXXXXXX,Y;C6:X
XXXXXXX,Y;C7:XXXXXXXX,Y;C8:XXXXXXXX,Y;#
•
Manual Health Report
Command: PWD:XXXX,STATUS%
[SMS message received]
ST:XXX;T:2005/01/28/13:00;V:XXXX;A1:0000;A2:0000;K1:X;K2:X;K3:X;K4:X;K5:X;K6:X;K7:X;K
8:X;OUT1:Y;OUT2:Y;OUT3:Y;#
12. Technical specifications
Power Supply
Current
Electrical
Peak Pulse Current
RS232
GSM900
Antenna
GSM1800
Dimensions
Total Weight
Loading Resistance
Radiation S/N
working temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this user manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
20.06.2011
Alarm report to control centre 2
0 means no report
1 means report
Report status for 8 phone numbers
0 means no report
1 means SMS but no phone dial
2 means phone dial but no SMS
3 means SMS first and then phone dial
Relay output control
0 means control not triggered by alarm
1 means alarm triggered control
0000
0000
0000
st
th
C1 ~ C8
1
~ 8
Y
Alarm Report enabled (1) / disabled (0)
RF Frequency
TX Frequency
RF Rating
RF Frequency
TX Frequency
RF Rating
CU2200
st
1
relay time lapse
nd
2
relay time lapse
rd
3
relay time lapse
Alarm Phone Number
7 ~ 12VDC
500mA (SMS send/receive), 50mA (standby)
< 2A
9 000 bps, 8 stop bits, 1 parity bit
925 ~ 960MHz
880 ~ 912MHz
2W, 12.5% loop loading
1805 ~ 1880MHz
1710 ~ 1785MHz
1W, 12.5% loop loading
135 x 105 x 30mm
480g
50Ω
0 dBi
-20°C ~ +50°C
12
v3-01
©Velleman nv