System Setup - Velleman CU2200 Manual Del Usuario

c. System Information Report
•
•
•
•
•
•
• Configure the CU2200 through the command text sent from your mobile phone. Upon reception and
processing, the unit will send a confirmation message to your mobile phone. If the command is incorrect,
the unit will reply SMS format is error!

System Setup

a.
• New Password Setup
Command: PWD:XXXX,NEWPWD:YYYY%
Example:
PWD:1234,NEWPWD:2222%
Default password: 1234
New password: 2222
• Manual Health Reporting
Command: PWD:XXXX,STATUS%
[SMS message received]
ST:XXX;T:2005/01/28/13:00;V:XXXX;A1:0000;A2:0000;K1:X;K2:X;K3:X;K4:X;K5:X;K6:X;K7:X;K8:
X;OUT1:Y;OUT2:Y;OUT3:Y;#
Example:
ST:002;T:2005/01/28/13:00;V:8.15;A1:0000;A2:0000;K1:X;K2:X;K3:X;K4:1;K5:1;K6:X;K7:X;K8
:X;OUT1:1;OUT2:1;OUT3:1;#
ST Unit serial number
T Unit internal clock
V Operating voltage
K1 Alarm channel 1
K1:0 means closed
K1:1 means open
OUT1 Relay output 1
OUT1:0 means open
OUT1:1 means closed
• Serial Number Setup
Command: PWD:XXXX,SN:YYY%
Example:
PWD:1234,SN:268%
Password: 1234 (default)
Serial number set into the unit: 268 (default: 000)
• Control Centre Number & Health Reporting Schedule Setup
These two values are configured by one single command.
(1) The control centre number is the phone number receiving the periodic report and regular report.
Besides the periodic report on schedule (command 5: power-up message), report of any command will
be sent to this number in addition to the mobile phone number sending the command. Maximum 2
control centres can be defined.
Command: PWD:XXXX,CTRZ:YYYYYYYYYYY,MM#%
XXXX
Z
YYYYYYYYY
MM
Example:
PWD:1234,CTR1:123456789,04#%
Password: 1234
Reporting health status every hour (refer to the reference table below)
(2) The periodic health report and any command from another mobile phone will be reported to the
first control centre with number 123456789.
20.06.2011
Default Setting
System Parameters RESET
System Version Check (hardware version CU2200)
Return Message
System Parameters Report
Manual Health Report
XXXX Current password
YYYY New password (4 digits)
XXXX Password
YYYY Serial number (0-999)
Password
Control centre number (max. 2 centres)
1 means 1
2 means 2
Phone number in control centre
Period code of automatic scheduled health report
CU2200
XXX ASCII code
XXXX Year/month/day/time
XXXX
K1 ~ 8 Alarm channel 1 ~ 8
OUT1 ~ 3 Relay output 1 ~ 3 (outputs 2 and 3 are
displayed but not available)
st
centre number
nd
centre number
6
v3-01
©Velleman nv