Cleaning And Maintenance; Technical Data - Clatronic SR 7028 BT/CD Manual De Instrucciones

AUX-IN Socket
For connecting to external players, e.g. MP3 player, smart-
phone, tablet PC etc.
1. Set the function switch (4) to the „CD / BT / AUX" position.
2. Connect the external device with a 3.5 mm stereo jack
plug to the AUX-IN socket. The following will appear in
the display " ".
3. Start the playback of your audio source. You will hear
the sound playback from the external device through the
loudspeakers. You may use the VOLUME control (9) to
adjust the volume. The CD buttons are not functional.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.

Cleaning and Maintenance

CAUTION:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not in-
played back. serted or inserted
incorrectly.
Batteries too
weak.
CD jumps dur- Check the disc
ing playback. for fingerprints,
dirt or scratches.
Device cannot The device is
be operated. blocked and
"hangs".
CD / BT Audio cable
playback not connected to the
available. AUX-IN socket.
SR7028BT_CD_IM
Symptoms
No audio
signal during
bluetooth
connection.
Device can not
be connected.
Model:...........................................................SR 7028 BT / CD
Power supply:...................................................... 230 V, 50 Hz
Battery operation: ...........................6 × 1.5 V, Type UM2 / R 14
Power consumption: .......................................................13 W
Protection class: ...................................................................
Solution
Net weight: ..................................................... approx. 1.25 kg
Ensure that the disc
Radio section:
is inserted with the
label facing upwards.
Bluetooth
Insert new batteries
Bluetooth support: ...........................................................V 4.2
or operate the device
Maximum radio-frequency power transmitted: ...........2.5 mW
with the mains lead.
Range: ....................................................... approx. 15 metres
Check the disc for
Transmission frequency: ............................ 2.402 - 2.480 GHz
fingerprints, dirt or
Protocols: ........................................................A2DP / AVRCP
scratches.
The right to make technical and design modifications in
Disconnect the
the course of continuous product development remains
power supply for
reserved.
5 seconds. Then
switch the device on
again.
Disconnect the cable
Hereby, CTC Clatronic International GmbH declares that the
from the AUX-IN
radio equipment type SR 7028 BT / CD is in compliance with
socket.
Directive 2014 / 53 / EU.
The full text of the EU declaration of conformity is available
at the following internet address: www.sli24.de
In the "Download" area, please enter the model name
SR 7028 BT / CD.
Tested for operation in Great Britain.
Course
The device is not
registered with
the audio source.
Volume too low.
Registration
does not work.
Audio source is
shut off.
Bluetooth is shut
off on the audio
source.
Bluetooth version
is not supported.

Technical Data

Frequency ranges: .......................... FM 87.5 ~ 108.0 MHz
Notice of Directive Conformity
Solution
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Increase the volume
on the device.
Increase the volume
on the audio source.
Check to see if
the audio source
supports the A2DP
protocol.
Turn on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Use a different play-
back device.
27
14.09.18