Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
3.
After the batteries are inserted, the Temperature Station will start receiving data
signal from the transmitter. The outdoor temperature should then be displayed
on the Temperature station. If this does not happen after 2 minutes, the
batteries will need to be removed from both units and reset from step 1.
4.
In order to ensure sufficient 868 MHz transmission however, this should under
good conditions be a distance no more than 100 meters between the final
position of the Temperature Station and the transmitter (see notes on
"Positioning" and "868 MHz Reception").
When more than one transmitter is to be used
1.
User shall remove all the batteries from the temperature station and transmitters
and wait 60 seconds if setting has been done with one transmitter before.
50
Publicidad
Tabla de contenido
