Bixolon STP-131 Guia De Instalacion página 2

◈ Self-Test
1. Make sure the paper roll has been installed properly.
2. Turn on the power while holding down the FEED button. The
self-test begins.
3. The self-test prints the current printer status, providing the control
ROM version and the DIP switch setting.
4. After printing the current printer status, self-test printing will print
the following, and pause. (The PAPER LED light blinks.)
SELF-TEST PRINTING.
PLEASE PRESS THE FEED BUTTON.
5. Press the FEED button to continue printing. The printer prints a
pattern using the built-in character set.
6. The self-test automatically ends and cuts the paper after printing
the following.
*** COMPLETED ***
7. After the self-test is complete, the printer returns to normal on-
line status.
※ Note
The self-test lets you know if your printer is operating properly. It
checks the print quality, ROM version, and DIP switch settings.
◈ Specifications
Item
Printing Method
Dot Density
Printing Width
Characters per line
Printing Speed *1)
Receive Buffer Size
Voltage
Printer
Environmental
Conditions
Life *2)
Paper Width
Paper Thickness
Paper
Diameter
Roll
Paper Tube
※ Note
*1) Printing speed may be slower depending on the data transmission
speed and the combination of control commands.
*2) The above values are calculated under printing level 2 with
recommended paper at normal temperature.
The values may vary with environment temperature, printing level,
etc.
◈ Serial (RS-232C) Fixed Interface Model
Windows Driver Installation
1. After running the product installation CD, run the Thermal
Printer > STP-131 > Drivers > Windows Driver > Drivers
Folder > Win STP-131_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Serial Port and click
Next.
All manuals and user guides at all-guides.com
Details
Thermal Line Printing
180 X 180 dpi (7dots/mm)
72 mm
42 (Font A : 12 x 24)
56 (Font B : 9 x 24)
23 lines/sec , 75 mm/sec
15K Bytes
SMPS Input
100 ~ 240 VAC
Voltage
Frequency 50/60 Hz
SMPS Output
24 VDC
Voltage
5 ~ 40℃ (Operating)
Temperature
-10 ~ 50℃ (Storage)
30~80%RH (Operating)
Humidity 10 ~ 90 % RH (Storage)
; Except for paper
Mechanism 30,000,000 lines
Head 100 Km
Auto Cutter 1,000,000 Cuts
80 mm
0.062 ~ 0.075 mm
Ø83 mm
Inner : Ø12 mm (0.47")
Outer : Ø18 mm (0.71")
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax >
BIXOLON STP-131 Icon > Right-Click > Properties.
7. In the Properties window, select the Port tab and click on the Port
Settings. Check to see that the information is identical to the self-
test results after installation.
8. In the Properties window, after selecting the General tab, click on
Print Test Page to confirm that printing is normal.
◈ Parallel (IEEE1284) Fixed Interface Model
Windows Driver Installation
1. After running the product installation CD, run the Thermal
Printer > STP-131 > Drivers > Windows Driver > Drivers
Folder > Win STP-131_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Parallel Port and
click Next. (Refer to Figure 1.)
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax >
BIXOLON STP-131 Icon > Right-Click > Properties.
7. In the Properties window, after selecting the General tab, click on
Print Test Page to confirm that printing is normal.
◈ WEEE
(Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is
should not be disposed with other household wastes at the end of its
working life, To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
☎ BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add) Digital Empire Block A, 5
Yeongtong-gu, Suweon-shi, Gyeonggi-do, Korea 443-813
(Tel.) +82-31-218-5500
● U.S. Office
(Add) BIXOLON America Inc., 1210 E. 223rd St., #330, Carson, CA 90745
(Tel.) +1-858 764 4580
● Germany Office
(Add) BIXOLON Germany GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
th
Floor, 980-3 Yeongtong-dong,