Battery Charge - Elari NanoPhone Manual Del Usuario

All manuals and user guides at all-guides.com
Instructions before use

Battery charge

Connect the adapter to a 3,5 mm round port and then at-
tach the microUSB-cable. Connect the other end of the char-
ging cable to a power adapter or a computer USB interface.
If the phone is on, the battery strength icon in the top right
corner of the screen should be scrolling (that indicates that
the charging process has begun). When the stripes stop
scrolling and the battery icon is full, the battery is full. If
the phone is off, the charging battery icon will also be dis-
played on the screen.
Pull out the charging adapter/USB cable after the charging
is completed.
• When battery capacity is low, the phone will display warn-
ing information. When battery capacity is too low, the
phone will automatically turn off. Please don't keep the
battery in a low power state for a long time, otherwise the
battery quality and work time will shorten.
• When the battery is next to zero, the phone may fail to
show the charging battery icon once the charger is con-
nected. Please wait for a while.
• For the NanoPhone to work properly, please use only the
original charger.
8
EN