Tabla de contenido
Publicidad
Required software
See the listing under the heading 'Required software' in the AXRF RF Subsystem and AutoCal Unit
User Manual 47090/270 on the supplied CD-ROM 46886/100.
Software installation
If an embedded or remote PC is supplied by Cobham, all software is supplied pre-installed.
Where the software is used for remote PC control and the PC is not supplied by Cobham, or if the PC
is changed or the hard disk is corrupted, see the Installation Instructions in the AXRF RF Subsystem
and AutoCal Unit User Manual.
Programming the AXRF RF Subsystem
General information
The AXRF APIs included in the User Manual are high-level, MVP-based API calls for use by the end
user of this RF subsystem.
Refer to the AXRF RF Subsystem and AutoCal Unit User Manual for Administrative, Source,
Modulation, Measurement, Advanced functions syntax.
AXRF control software
AXRF control description
The AXRF control software is a centralized tool to configure, calibrate, and manually control the
AXRF RF Subsystem:
The Configuration tab is used to define the slot positions of modules in the AXRF RF Subsystem.
The Control tab is used to control the AXRF RF Subsystem while it sources and measures RF
signals.
The Calibration tab is used to calibrate the AXRF RF Subsystem using an external calibration
standard.
The Checker tab is used to run and review subsystem diagnostics.
Installation
The Control Panel is installed during the driver installation process
Access the Control Panel from the Windows Start menu under:
All Programs\TEV\AXRF\AXRFControl.exe
Or open the AXRFControl.exe in:
Program Files\TEV\AXRF Subsystem.
Software
5
Publicidad
Tabla de contenido
