Kunft KAC4254 Manual De Instrucciones página 14

Remote control operation
NOTE:
• The buttons design is based on standard models and might be
slightly different from the actual one you purchase. However, the
remote's actual shape will be the same.
• All functions described can be performed
by this unit. If the unit cannot perform this
feature, nothing happens when you press
the corresponding button on the remote
control.
SHORT
CUT
MODE TIMER
ON
TIMER
FAN
OFF
FOLLOW
SLEEP SWING
LED
ME
1. ON/OFF Button
Press this button to turn the air conditioning
ON and OFF.
2. MODE Button
Press this button to modify the air conditioning
5
mode according to the following sequence:
1
6
SHORT
CUT
7
2
TIMER
MODE
ON
3 8
TIMER
FAN
OFF
NOTE: do not select the HEAT mode if the unit
4 11
FOLLOW
SLEEP SWING LED you purchased is for cooling only, as this mode
ME
9 10
is not supported by the cooling only appliance.
3. FAN Button
Press this button to select the fan speed,
according to the four available steps:
NOTE: you cannot change the fan speed
when in AUTO or DRY modes.
4. SLEEP Button
• Press this button to Activate/Deactivate the sleep function. It can
stay at the most comfortable temperature and save energy. This
function is available on COOL, HEAT or AUTO mode only.
• For further information, refer to SLEEP mode section.
NOTE: while the unit is running under SLEEP mode, this mode is
cancelled if any of the MODE, FAN SPEED or ON/OFF buttons are
pressed.
26
portable air conditioner
5. UP Button ( )
Press this button to raise the indoor temperature setting in 1º C
increments to 30º C.
DOWN Button ( )
Press this button to lower the indoor temperature setting in 1º C
increments to 17º C
NOTE: temperature control is not available in FAN mode.
6. SHORTCUT Button
• Press this button to restore the current settings or resume previous
settings.
•
button will make the unit run on AUTO mode, at 26º C, at AUTO
fan speed.
• Pressing this button when the remote control is on will make the
system automatically revert to the previous settings including
operating mode, setting temperature, fan speed level and sleep
feature (if activated).
• Pressing this button for more than 2 seconds will make the system
automatically restore the current operation settings including
operating mode, setting temperature, fan speed level and sleep
feature (if activated).
7. TIMER ON Button
Press this button to start the auto-on timer sequence. Each press will
increase the auto-time setting in 30-minute increments. When the
setting time displays 10.0, each press will increase the auto-timed
setting in 60-minute increments. To cancel the auto-time program,
simply adjust the auto-on timer to 0.0
8. TIMER OFF Button
Press this button to start the auto-off timer sequence. Each press
will increase the auto-time setting in 30-minute increments. When
the setting time displays 10.0, each press will increase the auto-time
setting in 60-minute increments. To cancel the auto-time program,
simply adjust the auto-off timer to 0.0
Swing Button
9.
Press this button to stop or start the horizontal auto swing fan feature
angles change by 6 degrees with each press. If the swing button
is pressed continuously for more than 2 seconds, the feature is
activated and will swing up and down automatically.
27
EN
KAC4254