Low Battery Indicator - Bresser ClimaTemp TB Instrucciones De Uso

-4.9° to -2.0° C lightblue 3
Temperature Color
range
-1.9° to 1.0° C white
1.1° to 4.0° C lightgreen
1
4.1° to 8.0° C lightgreen
2
8.1° to 12.0° C yellow
12.1° to 16.0° C orange 1
CHECKING AND DELETING MAX/MIN TEMPERATURE
AND HUMIDITY RECORDS
1. Press [ MAX/MIN ] key to check the maximum temperature
and humidity records.
2. Press [ MAX/MIN ] key again to check the minimum
temperature and humidity records.
3. Press [ MAX/MIN ] key three times to close Min/Max records
display.
4. Press and hold [ MAX/MIN ] for approx. 3 seconds to delete
the maximum and minimum records with a 'beep' tone
sounds.
20
28.1° to 32.0° C red 2
Temperature Color
range
32.1° to 36.0° C pink 1
36.1° to 40.0° C pink 2
40.1° to 45.0° C purple
above 45.1° C gray
(Fig. 4)
CHANNEL DISPLAY
The default channel is channel 1.
1. In normal time mode, press [ UP ] key to view the channels
from 1 to 3.
2. Press and hold [ UP ] key for approx. 2 seconds until a beep
tone sounds and to activate automatic channel display
change for 3 channels.
NOTE!
The main station can display the temperature and humidity
records of maximum 3 remote sensors of the same type. In this
ease different channels (1, 2 or 3) must be set for each remote
sensor. (see Fig. 3, 24)

LOW BATTERY INDICATOR

If the low battery indicator
window (Fig. 5), it indicates that the battery power of the remote
sensor is not high enough. Insert 2 new AA size batteries.
NOTE!
After inserting new batteries, press the [ RESET ] knob of the
remote sensor and the [ SENSOR ] key of the main station to
activate the automatic signal transmission again.
appears in the outdoor temperature