Technical Data; Cleaning And Maintenance - Bresser ClimaTemp TB Instrucciones De Uso

TECHNICAL DATA

MAIN STATION
Temperature -5° C to 50° C (23° F to 122° F)
measurement range:
MAIN STATION
Measuring accuracy: 0,1° C/F (above -10° C/14° F);
1° C/F (below -10° C/14° F)
Time signal: DCF
Power supply: 4.5V, 300 mA via power plug (and 3V
Lithium button cell CR2032 as a low energy
power supply)
REMOTE SENSOR
Temperature -20° C to 60° C (-4° F to 140° F)
measurement range:
Measuring accuracy: 0,1° C/F (above -10° C/14° F);
1° C/F (below -10° C/14° F)
Radio frequency: 433 MHz
Connectable sensors: up to 3
Transmission range: max. 30 m
Power supply: 3V via 2 x Alkaline batteries, AA size,
1.5V

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power supply
(remove plug and remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid
damaging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. The batteries should
be removed from the unit if it has not been used for a long time.
DISPOSAL
Dispose of the packaging materials properly, according to
their type, such as paper or cardboard. Contact your local
waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household
garbage!
As per Directive 2002/96/EC of the European Parliament on
waste electrical and electronic equipment and its adaptation
into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries
and rechargeable batteries, disposing of them in the
normal household waste is explicitly forbidden. Please make
sure to dispose of your used batteries as required by law — at a
21