Decommissioning - Audi Wallbox Manual Del Usuario

Decommissioning

See the corresponding illustrations in manual B.
Danger
Working on electric installations without proper precautions will result in the risk of electric
shock, and thus cause severe injury or death.
› Make sure that connection of the electrical power cannot occur during installation.
› Put up caution tape and warning signs to mark the working areas. Make sure no unauthori-
zed persons enter the working areas.
1. Turn off the input power of the wallbox
and make sure that the power stays off by
adding warning signs to avoid accidental
restart of power.
2. Use a plastic card or similar plastic tool
for removing the bezel in a gentle way,
without damaging it.
48
3. Dismount the screws of the front cover.
Remove the front cover and hold it close
to the main assembly while disconnecting
the HMI cable and, optionally, if present,
the RFID cable.
4. To continue dismounting the wallbox,
follow the installation steps from Install
wallbox in reverse order.