Appendix; Warranty; Eu Declaration Of Conformity - Audi Wallbox Manual Del Usuario

Appendix

Warranty

The manufacturer of this wallbox shall not
be liable for defects or damage due to the
failure to comply with the operating and
installation instructions, nor defects arising
from normal wear and tear.
This liability exclusion particularly applies to:
› Improper storage, installation or use.
› Installation, commissioning or repair by a
non-qualified electrician.
› Use of non-original spare parts.

EU Declaration of conformity

The Manufacturer declares that this charging station is manufactured and delivered in accor-
dance with the following directives and regulations:
› EN/IEC 61851-1 (2017)
› EN/IEC 61851-21-2 (2018)
› EN/IEC 61000-3-2 (2014)
› EN/IEC 61000-3-3 (2013)
› EN 301 489-1 V2.2.0
› EN 301 489-3 V2.1.1
› EN 301 489-17 V3.2.0
The full CE Declaration of Conformity is available from www.elli.eco/download.
50
› Use of materials not specified in this manu-
al for installation, operation, maintenance
and/or service of the wallbox will void the
warranty and the manufacturer shall not be
liable for defects or damage due to the use
thereof. This applies explicitly for materials
containing silicone or phosphorus.
› Modification of the wallbox or its com-
ponents that can cause the wallbox or its
components to become non-compliant
with the intended use.
› Not being able to provide any relevant do-
cumentation of the installation conducted
(e.g. commissioning report).
› EN 301 489-52 V1.1.0
› EN 301 908-1 V11.1.1
› EN 301 511 V12.5.1
› EN 300 330 V2.1.1
› EN 300 328 V2.1.1
› EN 301 893 V2.1.1