EuroSteam eXtreme 4171 Manual Del Usuario página 8

Filling the boiler tank before use
* Unscrew the boiler filler cap (B), fill the measure cup (9) to the fill line (DO NOT
OVERFILL).
* Use the measure cup (9) provided to fill the boiler tank (1).
* Screw on the boiler tank cap (B).
* Plug unit into the wall outlet.
* Fit the required attachment to the gun (H).
Switching on
* Plug the appliance power cord into the wall outlet and switch on the appliance us-
ing the On/Off switch (D); if the power is on, the red indicator light (F) will switch on.
* After a few minutes, the green indicator light (F) will switch on to show that the
boiler tank is pressurised and the appliance can now dispense steam.
Operation
* The green indicator light (F) will switch on and off during use to show that the
boiler tank is working.
* To prevent the steam from being dispensed accidentally, the lock switch (I) must
be moved on ON position; to release the steam function, move the switch (I) on
OFF position (3).
* To dispense the steam, press the button (L) on the gun (H) (4).
* When using for the first time, it is advised to spray the steam jet into a container to
get rid of any water residue that might be inside the tube (any water coming out is
due to condensation inside the tube). This action needs to be repeated even after
a few minutes of inactivity.
* When the gun (H) begins to dispense steam always point the jet downwards to
the ground.
*IMPORTANT*
When the Eurosteam® Extreme is not in use ALWAYS
lock the steam dispenser button with the switch (I).
*TIP: Fill with city tap water, spring water or bottled water. Do not use well water.*
8
Instructions for Use
All manuals and user guides at all-guides.com
INSTRUCTIONS FOR USE