Descargar Imprimir esta página

Removing And Fitting The Battery; Inserting The Battery; Switching Pole Pruning On And Off; Switching On The Pole Pruner - Stihl HTA 66 Manual De Instrucciones

Ocultar thumbs Ver también para HTA 66:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51

8 Removing and Fitting the Battery

► Swing the grip on the oil tank cap to the verti‐
cal position.
► Turn the oil tank cap counterclockwise as far
as it will go.
► Remove the oil tank cap.
► Fill up with saw chain oil, taking care not to
spill any oil and not to overfill the tank.
► If the grip on the oil tank cap has dropped into
the closed position: Raise the grip until it is
vertical.
1
2
► Place the oil tank cap in the filler opening so
that mark (1) lines up with mark (2).
► Press the oil tank cap down and rotate it clock‐
wise as far as it will go.
The oil tank cap snaps into place. The mark
(1) points to mark (3).
► Check to see if the oil tank cap can be pulled
upwards and off.
► If the oil tank cap cannot be pulled upwards
and off: Fold down the grip on the oil tank cap.
The oil tank is closed.
If the oil tank cap can be pulled upwards and off,
perform the following steps:
► Place the oil tank cap in the filler opening – in
any position.
0458-191-9821-B
► Press the oil tank cap down and rotate it clock‐
► Press the oil tank cap down and rotate it coun‐
► Now try again to close the oil tank.
► If the oil tank still cannot be closed properly:
8.1
1
► Insert the battery (1) up to the limit stop into
3
8.2
► Place the pole pruner on a level surface.
► Keep one hand in front of the battery compart‐
► Press both locking levers (1).
1
9.1
► Hold the pole pruner with one hand by the
2
wise as far as it will go.
terclockwise until mark (1) points to mark (2).
Do not use your pole pruner and contact a
STIHL dealer for assistance.
The pole pruner is not in a safe condition.
8
Removing and Fitting the
Battery

Inserting the battery

1
2
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
Removing the Battery
ment so that the battery (2) cannot fall out.
1
The battery (2) is released and can be
removed.
9
Switching Pole Pruning On
and Off

Switching on the Pole Pruner

control handle – wrap your thumb around the
control handle.
English
1
2
39

Publicidad

loading

Este manual también es adecuado para:

Hta 86