To Stop The Product - Husqvarna FS 4600 G II Manual De Usuario

To operate the menu system
The control buttons for the menu system operates
differently if you are in the main menu or in the
submenus.
1. Push down the menu button (A) and the enter button
(D) at the same time to open the menu system.
A B
2. To operate the main menu, do the procedure that
follows.
a) To move down in the main menu, push the menu
button (A).
b) To move up in the main menu, push the enter
button (D).
c) To enter a submenu push the up arrow key (B).
3. To operate the submenus, do the procedure that
follows.
a) To move down in the submenus, push the up
arrow key (B).
b) To move up in the submenus, push the down
arrow key (C).
c) To go back from a submenu, push the menu
button (A).
4. Push down the menu button (A) and the enter button
(D) at the same time to close the menu system.
For an overview of the menu structure, refer to
system overview on page 24 .
To change settings in the submenus
1. Find the setting that must be changed. Refer to
Menu system overview on page 24 .
2. Push the enter button (D) to select the setting.
Brackets are shown around the selection in the
display.
A B
1657 - 001 - 08.09.2021
C D
Menu
C D
3. Push the arrow keys (B) and (C) to change the
setting.
4. Push the enter button (D) to make the selection. The
brackets on the display goes out of view.
Note:
The configurations menu in the display is
password protected.
5. When changes are done in the menu system, turn
the ignition key to the "0" position.

To stop the product

1. Set the lever for speed control in the stop position.
25